A method for designing a variable-channel high-power cavity combiner

Yong-Tao Liu; Gui-Rong Huang; Lei Shang; Hong-Xiang Lin; Bai-Ting Du

doi:10.1088/1674-1137/40/8/087002

Chinese Physics C> 2016, Vol. 40> Issue(8) : 087002 DOI: 10.1088/1674-1137/40/8/087002

A method for designing a variable-channel high-power cavity combiner

1.
National Synchrotron Radiation Laboratory, University of Science and Technology of China, Hefei 230029, China

Abstract
HTML
Reference
Related

PDF

Abstract：
Cavity combiners have been put forward for high power combining due to their advantages of larger combining ability, variable input channels and less power loss. For a high power cavity combiner, it is better to keep the power loss ratio in a reasonable range, because large power loss would lead to strict requirements on the cooling system. A combiner with variable input channels is convenient for outputting different power levels according to practical demands. In this paper, a method for designing a variable-channel high-power cavity combiner is proposed, based on the relation between input and output coupling coefficients obtained by analyzing the equivalent circuit of the cavity combiner. This method can put the designed cavity combiner in a matching state and keep its power loss rate in a reasonable range as the number of input channels changes. As an example, a cavity combiner with 500 MHz and variable input channels from 16 to 64 is designed, and the simulation results show that our proposed method is feasible.
- cavity combiner ,
- variable channels ,
- equivalent circuit ,
- coupling coefficient

References

[1]	P. Marchand, T. Ruan, F. Ribeiro et al, Phys. Rev. ST Accel. Beams, 10: 112001 (2007)
[2]	P. Marchand, M. Louvet, K. Tavakoli et al, Successful RF and Cryogenic Tests of the SOLEIL Cryomodule, in Proceedings of the 21st Particle Accelerator Conference (Tennessee: PAC'05 ORNL/SNS, 2010), p. 3438
[3]	J. Jacob, J.-M. Mercier, M. Langlois et al, 352.2 MHz-150 KW Solid State Amplifiers at The ESRF, in Proceedings of the 2nd International Particle Accelerator Conference (San Sebastian: IPAC'11 EPS-AG, 2011), p. 71
[4]	Bravo, B, Mares, F and Perez et al, CACO: A CAVITY COMBINER FOR IOT AMPLIFIERS, in Proceedings of the 2nd International Particle Accelerator Conference (San Sebastian: IPAC'11 EPS-AG, 2011), p. 181
[5]	J. Jacob, L. Farvacque, G. Gautier et al, Commissioning of First 352.2 MHz-150 kW Solid State Amplifiers at the ESRF and Status of RD, in Proceedings of the 4th International Particle Accelerator Conference (Shanghai: IPAC'13 OC/SPC, 2013), p. 2708
[6]	Thomas P. Wangler, RF linear accelerators (2nd edition, John Wiley Sons, Inc., 2008), p. 145
[7]	David M. Pozar, Microwave engineering (Fourth edition, John Wiley Sons, Inc., 2009)
[8]	Rajesh Kumar, P. Singh, Divya Unnikrishnan et al, Nucl. Instrum. Methods A, 481: 203-213 (2012)
[9]	J. Gao, Nucl. Instrum. Methods A, 664: 36-42 (2002)
[10]	V. Khoruzhiy, arXiv:1305.3770, (2013)
[11]	J. Corlett, Derun Li, and A. Mitra, A 35 MHz re-buncher RF cavity for ISAC at Triumf, in Proceedings of the 6th European Particle Accelerator Conference (Stockholm: EPAC'98 IOP/Ltd, 1998), p. 1790

[1]	D. Patel , S. Mukherjee , N. Deshmukh , J. Lubian , Jian-Song Wang , T. Correa , B. K. Nayak , Yan-Yun Yang , Wei-Hu Ma , D. C. Biswas , Y. K. Gupta , S. Santra , E. T. Mirgule , L. S. Danu , N. L. Singh , A. Saxena . Influence of breakup on elastic and α-production channels in the ⁶Li+¹¹⁶Sn reaction. Chinese Physics C, 2017, 41(10): 104001. doi: 10.1088/1674-1137/41/10/104001
[2]	Jun-Kui Xu , You-Wu Su , Wu-Yuan Li , Wei-Wei Yan , Zong-Qiang Li , Wang Mao , Cheng-Guo Pang , Chong Xu . Study of neutron dose equivalent at the HIRFL deep tumor therapy terminal. Chinese Physics C, 2017, 41(6): 068201. doi: 10.1088/1674-1137/41/6/068201
[3]	Xiao-Ling Guo , Jian Cheng , Bo Zhang , Jing Zhang , Yuan Huang . A new active power filter topology based on a chopper circuit. Chinese Physics C, 2016, 40(1): 017005. doi: 10.1088/1674-1137/40/1/017005
[4]	De-Liang Zhang , Chang-Qing Feng , Jun-Bin Zhang , Qi Wang , Si-Yuan Ma , Zhong-Tao Shen , Di Jiang , Shan-Shan Gao , Yun-Long Zhang , Jian-Hua Guo , Shu-Bin Liu , Qi An . Onboard calibration circuit for the DAMPE BGO calorimeter front-end electronics. Chinese Physics C, 2016, 40(5): 056101. doi: 10.1088/1674-1137/40/5/056101
[5]	Jun-Long Tian , Hai-Tao Cui , Teng Gao , Ning Wang . Effect of Wigner energy on the symmetry energy coefficient in nuclei. Chinese Physics C, 2016, 40(9): 094101. doi: 10.1088/1674-1137/40/9/094101
[6]	YANG Xiong-Bin , HOU Mi . Transverse wakefield calculated by the double circuit model. Chinese Physics C, 2015, 39(3): 037001. doi: 10.1088/1674-1137/39/3/037001
[7]	JIA Xiao-Yu , ZHENG Shu-Xin . Analyzing the effects of post couplers in DTL tuning by the equivalent circuit model. Chinese Physics C, 2013, 37(12): 127005. doi: 10.1088/1674-1137/37/12/127005
[8]	ZUO Wei , GAN Sheng-Xin . Single particle potentials of asymmetric nuclear matter in different spin-isospin channels. Chinese Physics C, 2012, 36(10): 967-972. doi: 10.1088/1674-1137/36/10/009
[9]	DUAN Chun-Gui , LIU Na , MIAO Wen-Dan . The dependence of J/ψ-nucleon inelastic cross section on the Feynman variable. Chinese Physics C, 2011, 35(9): 804-807. doi: 10.1088/1674-1137/35/9/002
[10]	LIU Hua-Chang , PENG Jun , YIN Xue-Jun , OUYANG Hua-Fu , FU Shi-Nian . RF power coupling for the CSNS DTL. Chinese Physics C, 2011, 35(1): 92-95. doi: 10.1088/1674-1137/35/1/019
[11]	ZHANG Yuan , YU Cheng-Hui , JI Da-Heng , XU Gang , WEI Yuan-Yuan , QIN Qing . Measurement and correction of coupling in BEPCⅡ. Chinese Physics C, 2011, 35(12): 1143-1147. doi: 10.1088/1674-1137/35/12/012
[12]	ZUO Wei , ZHOU Shan-Gui , LI Jun-Qing , ZHAO En-Guang , Scheid W . Decomposition of the equation of state of asymmetric nuclear matter into different spin-isospin channels. Chinese Physics C, 2009, 33(7): 547-551. doi: 10.1088/1674-1137/33/7/008
[13]	DU Jia-Xin , KE Hong-Wei , XU Ming-Mei , LIU Lian-Shou . Characterizing variable for the critical point in momentum space. Chinese Physics C, 2009, 33(8): 655-660. doi: 10.1088/1674-1137/33/8/011
[14]	YANG Shi-Yu , CAO Zhou , DA Dao-An , XUE Yu-Xiong . Equivalent properties of single event burnout induced by different sources. Chinese Physics C, 2009, 33(5): 369-373. doi: 10.1088/1674-1137/33/5/010
[15]	ZHU Yong-Sheng . Implementation of upper limit calculation for a Poisson variable by Bayesian approach. Chinese Physics C, 2008, 32(2): 126-129. doi: 10.1088/1674-1137/32/2/010
[16]	Cheng Lan , Huang Weizhi , Zhou Baosen . Validity of the M-3Y Force Equivalent G-Matrix Elements for Heavy Nuclei. Chinese Physics C, 1996, 20(S1): 107-112.
[17]	Di Yaomin , Ha Yiming , Fu Deji , Xu Gongou . The Solution of Dynamical Equation of Motion of IBM-II in Continuous Variable Representation. Chinese Physics C, 1993, 17(S2): 133-142.
[18]	Shen Pengnian , Shen Xiaoyan , Zhang Zongye , Yu Youwen . Equivalent Local N-Y Potentials with S=-1 in Quark Cluster Model. Chinese Physics C, 1993, 17(S4): 371-379.
[19]	Di Yaomin , Ha Yiming , Fu Deji . An Effective Hamiltonian in the Continuous Variable Representation of IBM-II. Chinese Physics C, 1992, 16(S3): 329-337.
[20]	Yu Youwen , Shen Pengnian , Zhang Zongye . Equivalent Meson Exchange Potential on Quark Model and N-N Scattering. Chinese Physics C, 1990, 14(S4): 377-380.

Access

Get Citation

Yong-Tao Liu, Gui-Rong Huang, Lei Shang, Hong-Xiang Lin and Bai-Ting Du. A method for designing a variable-channel high-power cavity combiner[J]. Chinese Physics C, 2016, 40(8): 087002. doi: 10.1088/1674-1137/40/8/087002

RIS(for EndNote,Reference Manager,ProCite)

BibTex

Txt

Milestone

Received: 2016-01-23
Revised: 2016-03-01

Fund

Supported by National Natural Science Foundation of China (11079034)

Article Metric

Article Views(1810)
PDF Downloads(79)
Cited by(0)

Policy on re-use

To reuse of subscription content published by CPC, the users need to request permission from CPC, unless the content was published under an Open Access license which automatically permits that type of reuse.

通讯作者: 陈斌, bchen63@163.com

1.
沈阳化工大学材料科学与工程学院沈阳 110142

A method for designing a variable-channel high-power cavity combiner

Corresponding author: Yong-Tao Liu,

1. National Synchrotron Radiation Laboratory, University of Science and Technology of China, Hefei 230029, China

Received Date: 2016-01-23

Accepted Date: 2016-03-01

Available Online: 2016-08-05

Fund Project: Supported by National Natural Science Foundation of China (11079034)

Abstract: Cavity combiners have been put forward for high power combining due to their advantages of larger combining ability, variable input channels and less power loss. For a high power cavity combiner, it is better to keep the power loss ratio in a reasonable range, because large power loss would lead to strict requirements on the cooling system. A combiner with variable input channels is convenient for outputting different power levels according to practical demands. In this paper, a method for designing a variable-channel high-power cavity combiner is proposed, based on the relation between input and output coupling coefficients obtained by analyzing the equivalent circuit of the cavity combiner. This method can put the designed cavity combiner in a matching state and keep its power loss rate in a reasonable range as the number of input channels changes. As an example, a cavity combiner with 500 MHz and variable input channels from 16 to 64 is designed, and the simulation results show that our proposed method is feasible.

HTML

Reference (11)

A method for designing a variable-channel high-power cavity combiner

Abstract：

References

Access

Article Metrics

Metrics

通讯作者: 陈斌, bchen63@163.com

Email This Article