RF modulation studies on an S band pulse compressor

Get Citation
Guan Shu, Feng-Li Zhao, Shi-Lun Pei and Ou-Zheng Xiao. RF modulation studies on an S band pulse compressor[J]. Chinese Physics C, 2016, 40(3): 037002. doi: 10.1088/1674-1137/40/3/037002
Guan Shu, Feng-Li Zhao, Shi-Lun Pei and Ou-Zheng Xiao. RF modulation studies on an S band pulse compressor[J]. Chinese Physics C, 2016, 40(3): 037002.  doi: 10.1088/1674-1137/40/3/037002 shu
Milestone
Received: 2015-06-01
Revised: 2015-09-06
Fund

    Supported by National Natural Science Foundation of China (11475201)

Article Metric

Article Views(2563)
PDF Downloads(152)
Cited by(0)
Policy on re-use
To reuse of subscription content published by CPC, the users need to request permission from CPC, unless the content was published under an Open Access license which automatically permits that type of reuse.
通讯作者: 陈斌, bchen63@163.com
  • 1. 

    沈阳化工大学材料科学与工程学院 沈阳 110142

  1. 本站搜索
  2. 百度学术搜索
  3. 万方数据库搜索
  4. CNKI搜索

Email This Article

Title:
Email:

RF modulation studies on an S band pulse compressor

  • 1. Laboratory of Particle Acceleration Physics &
  • 2. University of Chinese Academy of Sciences, Beijing 100049, China
  • 3.  Laboratory of Particle Acceleration Physics &
Fund Project:  Supported by National Natural Science Foundation of China (11475201)

Abstract: An S band SLED-type pulse compressor has been manufactured by the Institute of High Energy Physics, Beijing, trying to reach 100 MW maximum input power, which means the output peak power is about 500 MW at the phase reversal time. To improve the reliability at very high power, amplitude modulation and phase modulation with flat-top output are considered, and RF modulation studies on the S-band SLED are presented in this paper. Furthermore, a method is developed using the CST Microwave Studio transient solver to simulate the time response of the pulse compressor, which can verify the modulation theory. In addition, the experimental setup was constructed and the flat-top output obtained in low power tests. Both amplitude modulation and phase modulation methods can give flat-top output, and the average power gain for both methods is almost the same.

    HTML

Reference (11)

目录

/

DownLoad:  Full-Size Img  PowerPoint
Return
Return