Study of a magnetic alloy-loaded cavity for compact synchrotrons

Get Citation
Hua Shi and Yoshiro Irie. Study of a magnetic alloy-loaded cavity for compact synchrotrons[J]. Chinese Physics C, 2016, 40(2): 027002. doi: 10.1088/1674-1137/40/2/027002
Hua Shi and Yoshiro Irie. Study of a magnetic alloy-loaded cavity for compact synchrotrons[J]. Chinese Physics C, 2016, 40(2): 027002.  doi: 10.1088/1674-1137/40/2/027002 shu
Milestone
Received: 2015-04-13
Revised: 2015-09-10
Fund

    Supported by National Natural Science Foundation of China (11175194)

Article Metric

Article Views(1272)
PDF Downloads(14)
Cited by(0)
Policy on re-use
To reuse of subscription content published by CPC, the users need to request permission from CPC, unless the content was published under an Open Access license which automatically permits that type of reuse.
通讯作者: 陈斌, bchen63@163.com
  • 1. 

    沈阳化工大学材料科学与工程学院 沈阳 110142

  1. 本站搜索
  2. 百度学术搜索
  3. 万方数据库搜索
  4. CNKI搜索

Email This Article

Title:
Email:

Study of a magnetic alloy-loaded cavity for compact synchrotrons

    Corresponding author: Hua Shi,
  • 1.  Key Laboratory of Particle Acceleration Physics and Technology, Institute of High Energy Physics, Chinese Academy of Sciences, Beijing 100049, China
  • 2.  High Energy Accelerator Research Organization, 1-1 Oho, Tsukuba, Ibaraki 305-0801, Japan
Fund Project:  Supported by National Natural Science Foundation of China (11175194)

Abstract: Magnetic alloy (MA)-loaded cavities have been widely used in compact proton and heavy-ion synchrotrons, and the MA core is the key issue in their development. Chinese-produced MA has never yet been adopted as core material for an MA-loaded cavity. To use Chinese-produced MA as the core material, it is necessary to study its properties, and compare with MA material produced elsewhere. In this paper, the properties of several MA cores made of Chinese-produced material are measured. Based on the measured results, a schematic design is produced for a cavity which could obtain 1 kV gap voltage with less than 1.5 kW power dissipation in the frequency range of 0.5-7 MHz. The difference between resonant frequencies obtained from simulation and analytical results is less than 10%.

    HTML

Reference (15)

目录

/

DownLoad:  Full-Size Img  PowerPoint
Return
Return