He and H sequential implantation induced surface blistering and exfoliation of Si covered with oxide layer

Get Citation
WANG Zhuo, GAO Yu-Jie, LI Meng-Kai, ZHU Fei, ZHANG Da-Cheng and LIU Chang-Long. He and H sequential implantation induced surface blistering and exfoliation of Si covered with oxide layer[J]. Chinese Physics C, 2013, 37(1): 016001. doi: 10.1088/1674-1137/37/1/016001
WANG Zhuo, GAO Yu-Jie, LI Meng-Kai, ZHU Fei, ZHANG Da-Cheng and LIU Chang-Long. He and H sequential implantation induced surface blistering and exfoliation of Si covered with oxide layer[J]. Chinese Physics C, 2013, 37(1): 016001.  doi: 10.1088/1674-1137/37/1/016001 shu
Milestone
Received: 2012-01-10
Revised: 1900-01-01
Article Metric

Article Views(1752)
PDF Downloads(289)
Cited by(0)
Policy on re-use
To reuse of subscription content published by CPC, the users need to request permission from CPC, unless the content was published under an Open Access license which automatically permits that type of reuse.
通讯作者: 陈斌, bchen63@163.com
  • 1. 

    沈阳化工大学材料科学与工程学院 沈阳 110142

  1. 本站搜索
  2. 百度学术搜索
  3. 万方数据库搜索
  4. CNKI搜索

Email This Article

Title:
Email:

He and H sequential implantation induced surface blistering and exfoliation of Si covered with oxide layer

    Corresponding author: LIU Chang-Long,

Abstract: Si wafers with a 220 nm top oxide layer were sequentially implanted at room temperature with 40 keV He and 35 keV H ions at fluence of 5× 1016/cm2 and 1× 1016/cm2, respectively. Techniques of scanning electron microscopy, atomic force microscopy and cross-sectional transmission electron microscopy (XTEM) were used to characterize the thermal evolution of surface damage as well as defect microstructures. Surface blisters as well as the localized exfoliation (~ 0.42 μm in depth) have been observed for samples annealed at temperatures of 500 ℃ and above. XTEM observations reveal a variety of defect microstructures, including cavities, platelets, nanometer or micrometer sized cracks and dislocations. The platelets and cracks are mainly distributed at the depth of about 0.42 μm parallel to the sample surface, which are responsible for the occurrence of the observed surface features. The relations between surface damage and defect microstructures are described in detail.

    HTML

目录

/

DownLoad:  Full-Size Img  PowerPoint
Return
Return