RF deflecting cavity for bunch length measurement in Tsinghua Thomson scattering X-ray source

SHI Jia-Ru; CHEN Huai-Bi; TANG Chuan-Xiang; HUANG Wen-Hui; DU Ying-Chao; ZHENG Shu-Xin; REN Li

doi:10.1088/1674-1137/33/S2/042

Chinese Physics C> 2009, Vol. 33> Issue(S2) : 161-164 DOI: 10.1088/1674-1137/33/S2/042

RF deflecting cavity for bunch length measurement in Tsinghua Thomson scattering X-ray source

Abstract
HTML
Reference
Related

PDF

Abstract：
An RF deflecting cavity used for bunch length measurement has been designed and fabricated at Tsinghua University for the Thomson Scattering X-Ray Source. The cavity is a 2856 MHz, π-mode, 3-cell standing-wave cavity, to diagnose the 3.5 MeV beam produced by photocathode electron gun. With a larger power source, the same cavity will again be used to measure the accelerated beam with energy of 50~MeV before colliding with the laser pulse.
The RF design using MAFIA for both the cavity shape and the power coupler is reviewed, followed by presenting the fabrication procedure and bench measurement results of two cavities.

References

[1]

. HE Xiao-Zhong, et al. HEP NP, 2006, 30(Supp.I): 81-83. (in Chinese)2. DU Ying-Chao et al. Chinese Phys. Lett., 2007, 24: 1876-18783. TANG Chuan-Xiang et al. Design of a Source to Supply Ultra-Fast Electron and X-Ray Pulses. In: Proceedings ofPAC 2007. USA: Albuquerque, 2007. 1046-10484. SHI Jia-Ru et al. RF Deecting Cavity Design for BunchLength Measurement of Photoinjector at Tsinghua University. Chinese Phys. C, 2008, 32: 837-8415. LI D et al. Calculations of External Coupling to a Sin-gle Cell RF Cavity. In: Proceedings of LINAC 1998. USA:Chicago, 1998. 977-979

[1]	N. Amangeldi , N. Burtebayev , G. Yergaliuly , Maulen Nassurlla , B. Balabekov , Abylay Tangirbergen , Awad A. Ibraheem , Mohamed A. Dewidar , Sh. Hamada . Breakup of ⁷Li in the field of ^118,120Sn nuclei and its effect on the elastic scattering channel. Chinese Physics C, 2026, 50(2): 1-12.
[2]	Lu Feng , Tao Han , Jing-Fei Zhang , Xin Zhang . Prospects for searching for sterile neutrinos in dynamical dark energy cosmologies using joint observations of gravitational waves and γ-ray bursts. Chinese Physics C, 2026, 50(2): 1-12.
[3]	Jian Liu , Qiang Su , Qinglin Niu , Lei Wang , Zhongzhou Ren . Charged-current quasielastic neutrino scattering off nuclei with nucleon-nucleon short-range correlations. Chinese Physics C, 2025, 49(10): 104102. doi: 10.1088/1674-1137/ade126
[4]	G. Leckenby , M. Trassinelli , Rui-jiu Chen , R. S. Sidhu , J. Glorius , M. S. Sanjari , Yu. A. Litvinov , M. Bai , F. Bosch , C. Brandau , T. Dickel , I. Dillmann , D. Dmytriiev , T. Faestermann , O. Forstner , B. Franczak , H. Geissel , R. Gernhäuser , Bing-shui Gao , C. J. Griffin , A. Gumberidze , E. Haettner , R. Heß , P.-M. Hillenbrand , P. Kienle , W. Korten , Ch. Kozhuharov , N. Kuzminchuk , S. Litvinov , E. B. Menz , T. Morgenroth , C. Nociforo , F. Nolden , N. Petridis , U. Popp , S. Purushothaman , R. Reifarth , C. Scheidenberger , U. Spillmann , M. Steck , Th. Stöhlker , Y. K. Tanaka , S. Trotsenko , L. Varga , Meng Wang , H. Weick , P. J. Woods , T. Yamaguchi , Yu-hu Zhang , Jian-wei Zhao . Bayesian and Monte Carlo approaches to estimating uncertainty for the measurement of the bound-state β^- decay of ²⁰⁵Tl⁸¹⁺. Chinese Physics C, 2025, 49(11): 114001. doi: 10.1088/1674-1137/ade956
[5]	ZHANG Zhou-Li , HE Yuan , ZHANG Bin , LI De-Run , SHI Ai-Min , PAN Gang , DU Xiao-Nan , SUN Lie-Peng . Study of influence of radial matcher section end shape on RFQ cavity frequency. Chinese Physics C, 2014, 38(7): 077007. doi: 10.1088/1674-1137/38/7/077007
[6]	ZHANG Cong , HE Yuan , ZHAO Hong-Wei , ZHANG Sheng-Hu . Multipacting simulation and analysis of a taper quarter wave cavity by using Analyst-PT3P. Chinese Physics C, 2012, 36(4): 362-366. doi: 10.1088/1674-1137/36/4/012
[7]	YANG Hong-Xun (for the BESⅡ collaboration) . Partial wave analysis of J/ψ→ppπ⁰ and measurement of J/ψ→ppη, ppη´. Chinese Physics C, 2009, 33(12): 1331-1335. doi: 10.1088/1674-1137/33/12/048
[8]	ZHU Xiong-Wei , GAO Jie . Study on ILC bunch compressor. Chinese Physics C, 2008, 32(11): 928-930. doi: 10.1088/1674-1137/32/11/016
[9]	PENG Quan-Ling , SUN Jian , ZHAO Guang-Yuan , SHI Cai-Tu . Principle and Software Design of Helmhotz Coil Measurement System. Chinese Physics C, 2001, 25(9): 920-925.
[10]	Li Yangguo . Antiproton -Nucleus Charge Exchange Reaction and Inelastic Scattering. Chinese Physics C, 1996, 20(11): 1021-1027.
[11]	HOU Ren-Chang , ZHAO Xuan . QUADRUPOLE-OCTUPOLE TWO-PHONON EXCITATIONS IN INELASTIC SCATTERING. Chinese Physics C, 1983, 7(2): 236-244.

Access

Get Citation

SHI Jia-Ru, CHEN Huai-Bi, TANG Chuan-Xiang, HUANG Wen-Hui, DU Ying-Chao, ZHENG Shu-Xin and REN Li. RF deflecting cavity for bunch length measurement in Tsinghua Thomson scattering X-ray source[J]. Chinese Physics C, 2009, 33(S2): 161-164. doi: 10.1088/1674-1137/33/S2/042

RIS(for EndNote,Reference Manager,ProCite)

BibTex

Txt

Milestone

Received: 2009-01-05
Revised: 1900-01-01

Article Metric

Article Views(4498)
PDF Downloads(695)
Cited by(0)

Policy on re-use

To reuse of subscription content published by CPC, the users need to request permission from CPC, unless the content was published under an Open Access license which automatically permits that type of reuse.

通讯作者: 陈斌, bchen63@163.com

1.
沈阳化工大学材料科学与工程学院沈阳 110142

RF deflecting cavity for bunch length measurement in Tsinghua Thomson scattering X-ray source

Corresponding author: SHI Jia-Ru,

Received Date: 2009-01-05
Accepted Date: 1900-01-01
Available Online: 2009-01-08

Abstract:

An RF deflecting cavity used for bunch length measurement has been designed and fabricated at Tsinghua University for the Thomson Scattering X-Ray Source. The cavity is a 2856 MHz, π-mode, 3-cell standing-wave cavity, to diagnose the 3.5 MeV beam produced by photocathode electron gun. With a larger power source, the same cavity will again be used to measure the accelerated beam with energy of 50~MeV before colliding with the laser pulse.
The RF design using MAFIA for both the cavity shape and the power coupler is reviewed, followed by presenting the fabrication procedure and bench measurement results of two cavities.