Study of the design of CSNS MEBT

OUYANG Hua-Fu; LIU Hua-Chang; FU Shi-Nian

doi:10.1088/1674-1137/33/7/015

Chinese Physics C> 2009, Vol. 33> Issue(7) : 583-589 DOI: 10.1088/1674-1137/33/7/015

Study of the design of CSNS MEBT

Abstract
HTML
Reference
Related

PDF

Abstract：
The design of CSNS MEBT has two objectives: (1) to match the beam both in the transversal direction and the longitudinal direction from RFQ into DTL; (2) to further chop the beam into the required time structure asked by RCS. It is very difficult and critical to control well the emittance growth and in the meantime to match and chop the beam. Firstly, the optical design is done and optimized, and the multi-particle simulations show that the maximum emittance growth is successfully controlled within 14%. Secondly, based on the different beam envelopes obtained by TRACE-3D and PARMELA, the least deflecting angle of the chopper is determined by TRACE-3D. At last, the field of steering magnet is determined through simulations.

References

[1]

. FANG S X, FU S N et al. J. of the Korean Phys. Soc., 2006,48(4): 697-7022. WEI J, FANG S X et al. J. Korean Phys., 2007, 50(5):1373-13773. Stamples J, Oshatz D et al. Proc. of LINAC2000. 250-2524. FU S N, Kato T. Nucl. Instrum. Methods A, 2001, 457:423-4375. Kurennoy S S, Power J F. Proc. of LINAC98. 1004-10066. FU S N, Kato T. Nucl. Instrum. Methods A, 2000, 440:296-3067. Crandall K R, Rusthoi D P. Los Alamos Report LAUR-97-8868. Ryne R (ed.). Proc. of CAP.93. AIP Conference Proceed-ings 297. 19939. LIU H C, OUYANG H F. Chinese Physics C (HEP NP)2008, 32(4): 280-284

[1]	Chuang Zhang . Physical design study of the CEPC booster. Chinese Physics C, 2016, 40(9): 097004. doi: 10.1088/1674-1137/40/9/097004
[2]	Liang-Sheng Huang , Hong-Fei Ji , Sheng Wang . Design study for a 500 MeV proton synchrotron with CSNS linac as an injector. Chinese Physics C, 2016, 40(9): 097003. doi: 10.1088/1674-1137/40/9/097003
[3]	YUAN Yao-Shuo , LI Kai-Wei , WANG Na , Yoshiro Irie , WANG Sheng . Study of the beam loading effect in the CSNS/RCS. Chinese Physics C, 2015, 39(4): 047003. doi: 10.1088/1674-1137/39/4/047003
[4]	LI Xiao , SUN Hong , LONG Wei , ZHAO Fa-Cheng , ZHANG Chun-Lin . Design and performance of the LLRF system for CSNS/RCS. Chinese Physics C, 2015, 39(2): 027002. doi: 10.1088/1674-1137/39/2/027002
[5]	JIA Huan , HE Yuan , YUAN You-Jin , SONG Ming-Tao , HUANG Shi-Chun , ZHANG Xiang , YUAN Chen-Zhang , NIU Hai-Hua , ZHANG Peng , WU Jun-Xia , ZHANG Yong , KANG Xin-Cai , LUO Chen . Design and construction of the MEBT1 for CADS injector scheme II. Chinese Physics C, 2015, 39(10): 107003. doi: 10.1088/1674-1137/39/10/107003
[6]	YIN Xue-Jun , LI A-Hong , XIAO Yong-Chuang , CHEN Qiang , LIU Hua-Chang , GONG Ke-Yun , FU Shi-Nian . Preliminary study on the RF tuning of CSNS DTL. Chinese Physics C, 2014, 38(2): 027002. doi: 10.1088/1674-1137/38/2/027002
[7]	LIANG Tai-Ran , SHEN Fei , YIN Wen , YU Quan-Zhi , YU Chun-Xu , TAO Ju-Zhou , LIANG Tian-Jiao . Study of shielding design for SANS at CSNS. Chinese Physics C, 2014, 38(7): 078202. doi: 10.1088/1674-1137/38/7/078202
[8]	JING Han-Tao , TANG Jing-Yu , YANG Zheng . Study on collimation and shielding of the back-streaming neutrons at the CSNS target. Chinese Physics C, 2013, 37(11): 117002. doi: 10.1088/1674-1137/37/11/117002
[9]	ZOU Yi-Qing , WANG Na , KANG Ling , QU Hua-Min , HE Zhe-Xi , YU Jie-Bing . Thermal analysis and cooling structure design of the primary collimator in CSNS/RCS. Chinese Physics C, 2013, 37(5): 057004. doi: 10.1088/1674-1137/37/5/057004
[10]	AN Yu-Wen , WANG Sheng . Study on application of independent component analysis in the CSNS/RCS. Chinese Physics C, 2013, 37(3): 037006. doi: 10.1088/1674-1137/37/3/037006
[11]	LU Yan-Hua , LI Gang , OUYANG Hua-Fu . Design and development of the CSNS ion source control system. Chinese Physics C, 2013, 37(7): 077004. doi: 10.1088/1674-1137/37/7/077004
[12]	TIAN Jian-Min , XU Mei-Hang , ZHAO Zhong-Liang , CHEN Chang , RUAN Xiang-Dong , CHEN Yuan-Bo , XU Tao-Guang , LU Shuang-Tong . Improved design and construction of an ionization chamber for the CSNS beam loss monitor (BLM). Chinese Physics C, 2012, 36(4): 329-333. doi: 10.1088/1674-1137/36/4/006
[13]	YANG Xiao-Yu , XU Tao-Guang , FU Shi-Nian , LIU Yu-Dong , LI Yong , ZHAO Ya-Liang . Design of a stripline kicker for tune measurementin CSNS RCS. Chinese Physics C, 2012, 36(7): 666-669. doi: 10.1088/1674-1137/36/7/017
[14]	LIU Jian , WANG Qing-Bin , WU Qing-Biao , MA Zhong-Jian . Design and analysis of the tunnel connecting the beamcorridor and the spectrum hall of the CSNS. Chinese Physics C, 2011, 35(1): 104-108. doi: 10.1088/1674-1137/35/1/022
[15]	XU Shou-Yan , WANG Sheng . Study on space charge effects of the CSNS/RCS. Chinese Physics C, 2011, 35(12): 1152-1158. doi: 10.1088/1674-1137/35/12/014
[16]	LUO Feng , BEI Hua , DAI Zhi-Min . Design study of an FEL oscillator with a waveguide. Chinese Physics C, 2010, 34(4): 512-515. doi: 10.1088/1674-1137/34/4/019
[17]	OUYANG Hua-Fu , ZHANG Hua-Sun , GONG Ke-Yun , LIU Hua-Chang , WU Xiao-Bing . Study on the pre-chopper in CSNS LEBT. Chinese Physics C, 2010, 34(8): 1122-1126. doi: 10.1088/1674-1137/34/8/016
[18]	RUAN Yu-Fang , HAN Lu-Xiang , LIU Hua-Chang , ZHANG Hua-Shun , XU Tao-Guang , FU Shi-Nian . Design and simulation of a wire scanner for the CSNS linac. Chinese Physics C, 2010, 34(10): 1655-1660. doi: 10.1088/1674-1137/34/10/020
[19]	WANG Sheng , FANG Shou-Xian , FU Shi-Nian , LIU Wei-Bin , OUYANG Hua-Fu , QIN Qing , TANG Jing-Yu , WEI Jie . Introduction to the overall physics design of CSNS accelerators. Chinese Physics C, 2009, 33(S2): 1-3. doi: 10.1088/1674-1137/33/S2/001
[20]	LIU Hua-Chang , OUYANG Hua-Fu . Thermal analysis and water-cooling design of the CSNS MEBT 324MHz buncher cavity. Chinese Physics C, 2008, 32(4): 280-284. doi: 10.1088/1674-1137/32/4/008

Access

Get Citation

OUYANG Hua-Fu, LIU Hua-Chang and FU Shi-Nian. Study of the design of CSNS MEBT[J]. Chinese Physics C, 2009, 33(7): 583-589. doi: 10.1088/1674-1137/33/7/015

OUYANG Hua-Fu, LIU Hua-Chang and FU Shi-Nian. Study of the design of CSNS MEBT[J]. Chinese Physics C, 2009, 33(7): 583-589. doi: 10.1088/1674-1137/33/7/015 shu

RIS(for EndNote,Reference Manager,ProCite)

BibTex

Txt

Milestone

Received: 2008-09-28
Revised: 2009-01-08

Article Metric

Article Views(5850)
PDF Downloads(679)
Cited by(0)

Policy on re-use

To reuse of subscription content published by CPC, the users need to request permission from CPC, unless the content was published under an Open Access license which automatically permits that type of reuse.

通讯作者: 陈斌, bchen63@163.com

1.
沈阳化工大学材料科学与工程学院沈阳 110142

Study of the design of CSNS MEBT

Corresponding author: OUYANG Hua-Fu,

Received Date: 2008-09-28

Accepted Date: 2009-01-08

Available Online: 2009-07-05

Abstract:

The design of CSNS MEBT has two objectives: (1) to match the beam both in the transversal direction and the longitudinal direction from RFQ into DTL; (2) to further chop the beam into the required time structure asked by RCS. It is very difficult and critical to control well the emittance growth and in the meantime to match and chop the beam. Firstly, the optical design is done and optimized, and the multi-particle simulations show that the maximum emittance growth is successfully controlled within 14%. Secondly, based on the different beam envelopes obtained by TRACE-3D and PARMELA, the least deflecting angle of the chopper is determined by TRACE-3D. At last, the field of steering magnet is determined through simulations.

HTML

Reference (1)

Study of the design of CSNS MEBT

Abstract：

References

Access

Article Metrics

Metrics

通讯作者: 陈斌, bchen63@163.com

Email This Article