Experimental study on TiN coated racetrack-type ceramic pipe

Get Citation
WANG Jie, XU Yan-Hui, ZHANG Bo, WEI Wei, FAN Le, PEI Xiang-Tao, HONG Yuan-Zhi and WANG Yong. Experimental study on TiN coated racetrack-type ceramic pipe[J]. Chinese Physics C, 2015, 39(11): 117005. doi: 10.1088/1674-1137/39/11/117005
WANG Jie, XU Yan-Hui, ZHANG Bo, WEI Wei, FAN Le, PEI Xiang-Tao, HONG Yuan-Zhi and WANG Yong. Experimental study on TiN coated racetrack-type ceramic pipe[J]. Chinese Physics C, 2015, 39(11): 117005.  doi: 10.1088/1674-1137/39/11/117005 shu
Milestone
Received: 2015-01-16
Revised: 2015-05-31
Fund

    Supported by National Nature Science Foundation of China (11075157)

Article Metric

Article Views(1283)
PDF Downloads(22)
Cited by(0)
Policy on re-use
To reuse of subscription content published by CPC, the users need to request permission from CPC, unless the content was published under an Open Access license which automatically permits that type of reuse.
通讯作者: 陈斌, bchen63@163.com
  • 1. 

    沈阳化工大学材料科学与工程学院 沈阳 110142

  1. 本站搜索
  2. 百度学术搜索
  3. 万方数据库搜索
  4. CNKI搜索

Email This Article

Title:
Email:

Experimental study on TiN coated racetrack-type ceramic pipe

    Corresponding author: WANG Yong,
  • 1. National Synchrotron Radiation Laboratory, University of Science and Technology of China, Hefei 230029, China
Fund Project:  Supported by National Nature Science Foundation of China (11075157)

Abstract: TiN film was coated on the internal surface of a racetrack-type ceramic pipe by three different methods: radio-frequency sputtering, DC sputtering and DC magnetron sputtering. The deposition rates of TiN film under different coating methods were compared. The highest deposition rate was 156 nm/h, which was obtained by magnetron sputtering coating. Based on AFM, SEM and XPS test results, the properties of TiN film, such as film roughness and surface morphology, were analyzed. Furthermore, the deposition rates were studied with two different cathode types, Ti wires and Ti plate. According to the SEM test results, the deposition rate of TiN/Ti film was about 800 nm/h with Ti plate cathode by DC magnetron sputtering. Using Ti plate cathode rather than Ti wire cathode can greatly improve the film deposition rate.

    HTML

Reference (7)

目录

/

DownLoad:  Full-Size Img  PowerPoint
Return
Return