Design study of the SSC-LINAC re-buncher

SUN Lie-Peng; ZHAO Hong-Wei; SUN Zhou-Ping; HE Yuan; SHI Ai-Min; XIAO Chen; DU Xiao-Nan; ZHANG Cong; ZHANG Zhou-Li

doi:10.1088/1674-1137/37/2/027002

Chinese Physics C> 2013, Vol. 37> Issue(2) : 027002 DOI: 10.1088/1674-1137/37/2/027002

Design study of the SSC-LINAC re-buncher

Abstract
HTML
Reference
Related

PDF

Abstract：
A re-buncher with spiral arms for a heavy ion linear accelerator named as SSC-LINAC at HIRFL (the heavy ion research facility of Lanzhou) has been constructed. The re-buncher, which is used for beam longitudinal modulation and matching between the RFQ and DTL, is designed to be operated in continuous wave (CW) mode at the Medium-Energy Beam-Transport (MEBT) line to maintain the beam intensity and quality. Because of the longitudinal space limitation, the re-buncher has to be very compact and will be built with four gaps. We determined the key parameters of the re-buncher cavity from the simulations using Microwave Studio software, such as the resonant frequency, the quality factor Q and the shunt impedance. The detailed design of a 53.667 MHz spiral cavity and measurement results of its prototype will be presented.

References

[1]

Mitra A K, Chan A. Design Considerations and Measurements of a 35 MHz Spiral re-buncher Cavity. TRIUMF Design Note, 1998[2] XIAO Chen, HE Yuan, YUAN You-Jin et al. Chinese Physics C (HEP NP), 2011, 35(5): 500-504[3] Hauser J, Klein H, Schempp A. Nuclear Instruments and Methods in Physics Research, 1976, 135(3): 409-414[4] Aoki T, Stinglin L, Kamigaito O et al. Nuclear Instruments and Methods in Physics Research, 2008, 592(3): 171-179[5] Welsch C P, Kunel K U, Schempp A. Development of Rebunching Cavities at IAP. Proceeding of LINAC2000. Monterey California, 2000[6] Aoki T, Stingelin L, Kamigaito O et al. Nuclear Instruments and Methods in Physics Research A, 2008, 592, 171-179[7] LI Zhi-Hui, TANG Jing-Yu. High Power Laser and Particle Beams, 2000, 12(1): 107-110 (in Chinese)[8] Peebles P Z, Parvarandeh M. Particle Accelerators, 2004, 6(3): 201-209[9] Schuh M, Kuhnel K U, Welsch C P. Optimization of Spiral-Load Cavities Using the 3D Code Opera/Soprano. Proceedings of LINAC. Victoria Canada, 2008[10] Mitra A K, Poirier R L. A 35 MHz Siral re-buncher Cavity for the TRIUMF ISAC Facility. Proceedings of 1999 Particle Conference. New York: United Stetes, 1999

[1]	Liang-Sheng Huang , Hong-Fei Ji , Sheng Wang . Design study for a 500 MeV proton synchrotron with CSNS linac as an injector. Chinese Physics C, 2016, 40(9): 097003. doi: 10.1088/1674-1137/40/9/097003
[2]	MENG Cai , TANG Jing-Yu , PEI Shi-Lun , YAN Fang . Mismatch study of C-ADS main linac. Chinese Physics C, 2015, 39(9): 097002. doi: 10.1088/1674-1137/39/9/097002
[3]	WANG Yi-Wei , SCHULTE Daniel , GAO Jie . Main linac lattice design and optimization for E_cm=1 TeV CLIC. Chinese Physics C, 2014, 38(6): 067009. doi: 10.1088/1674-1137/38/6/067009
[4]	ZHANG Xiao-Hu , YUAN You-Jin , XIA Jia-Wen , YIN Xue-Jun , DU Heng , LI Zhong-Shan . Conceptional design of a heavy ion linac injector for HIRFL-CSRm. Chinese Physics C, 2014, 38(10): 107002. doi: 10.1088/1674-1137/38/10/107002
[5]	ZHU Hong-Yan , DONG Lan , LI Bo . Design and simulation of a wire position monitor for cryogenicsystems in an ADS linac. Chinese Physics C, 2014, 38(8): 087001. doi: 10.1088/1674-1137/38/8/087001
[6]	YAN Fang , LI Zhi-Hui , MENG Cai , TANG Jing-Yu , SUN Biao . Physics design for the C-ADS main linac based on two different injector design schemes. Chinese Physics C, 2014, 38(2): 027004. doi: 10.1088/1674-1137/38/2/027004
[7]	ZHAO Wei , TANG Xiao , SHI Rong-Jian , HOU Mi . Coupler design for an L-band electron linac. Chinese Physics C, 2012, 36(8): 765-768. doi: 10.1088/1674-1137/36/8/015
[8]	XIAO Chen , HE Yuan , YUAN You-Jin , LU Yuan-Rong , LIU Yong , WANG Zhi-Jun , DU Xiao-Nan , YAO Qing-Gao , LIU Ge , XU Meng-Xin , HE Shou-Bo , XIA Jia-Wen . A particle-in-cell mode beam dynamics simulation of medium energy beam transport for the SSC-Linac. Chinese Physics C, 2012, 36(1): 84-90. doi: 10.1088/1674-1137/36/1/015
[9]	LI Xiao-Ni , YUAN You-Jin , XIAO Chen , HE Yuan , WANG Zhi-Jun , SHENG Li-Na . Beam dynamics simulation of HEBT for the SSC-linac injector. Chinese Physics C, 2012, 36(11): 1126-1131. doi: 10.1088/1674-1137/36/11/016
[10]	XIAO Chen , HE Yuan , YUAN You-Jin , YAO Qing-Gao , WANG Zhi-Jun , CHANG Wei , LIU Yong , XIA Jia-Wen . Particle-in-cell mode beam dynamics simulation of the low energy beam transport for the SSC-linac injector. Chinese Physics C, 2011, 35(5): 500-504. doi: 10.1088/1674-1137/35/5/019
[11]	WU Xi , YUAN Ping , HE Yuan , MA Li-Zhen , ZHANG Xiao-Qi , WU Wei , YANG Ya-Qing . Thermal analysis of DTL in the SSC-LINAC. Chinese Physics C, 2011, 35(10): 952-954. doi: 10.1088/1674-1137/35/10/012
[12]	RUAN Yu-Fang , HAN Lu-Xiang , LIU Hua-Chang , ZHANG Hua-Shun , XU Tao-Guang , FU Shi-Nian . Design and simulation of a wire scanner for the CSNS linac. Chinese Physics C, 2010, 34(10): 1655-1660. doi: 10.1088/1674-1137/34/10/020
[13]	XIAO Chen , HE Yuan , LU Yuan-Rong , Yuri Batygin , YIN Ling , WANG Zhi-Jun , YUAN You-Jin , LIU Yong , CHANG Wei , DU Xiao-Nan , WANG Zhi , XIA Jia-Wen . A Particle-in-cell scheme of the RFQ in the SSC-Linac. Chinese Physics C, 2010, 34(11): 1749-1753. doi: 10.1088/1674-1137/34/11/016
[14]	WANG Zhi-Jun , HE Yuan , WU Wei , YANG Ya-Qing , XIAO Chen . Design optimization of the APF DTL in the SSC-linac. Chinese Physics C, 2010, 34(10): 1639-1642. doi: 10.1088/1674-1137/34/10/017
[15]	RUAN Yu-Fang , XU Tao-Guang , FU Shi-Nian . Design and simulation of a beam position monitor for the high current proton linac. Chinese Physics C, 2009, 33(3): 240-244. doi: 10.1088/1674-1137/33/3/015
[16]	FENG Guang-Yao , PEI Yuan-Ji , WANG Lin , ZHANG Shan-Cai , WU Cong-Feng , JIN Kai , LI Wei-Min . Physical design of a 10 MeV LINAC for polymer radiation processing. Chinese Physics C, 2009, 33(S2): 135-138. doi: 10.1088/1674-1137/33/S2/035
[17]	ZHU Xiong-Wei , WANG Shu-Hong , CHEN Sen-Yu . Study on the characteristics of linac based THz light source. Chinese Physics C, 2009, 33(10): 922-925. doi: 10.1088/1674-1137/33/10/018
[18]	ZHANG Meng , ZHAO Ming-Hua , WANG Bao-Liang . Study of multipacting effect in sub-harmonic buncher of SSRF linac. Chinese Physics C, 2009, 33(S2): 86-88. doi: 10.1088/1674-1137/33/S2/022
[19]	SUI Yan-Feng , MA Hui-Zhou , CAO Jian-She , MA Li . Design and simulation of the wire scanner for the injector linac of BEPCⅡ. Chinese Physics C, 2008, 32(5): 397-399. doi: 10.1088/1674-1137/32/5/015
[20]	LIU Hua-Chang , OUYANG Hua-Fu . Thermal analysis and water-cooling design of the CSNS MEBT 324MHz buncher cavity. Chinese Physics C, 2008, 32(4): 280-284. doi: 10.1088/1674-1137/32/4/008

Access

Get Citation

SUN Lie-Peng, ZHAO Hong-Wei, SUN Zhou-Ping, HE Yuan, SHI Ai-Min, XIAO Chen, DU Xiao-Nan, ZHANG Cong and ZHANG Zhou-Li. Design study of the SSC-LINAC re-buncher[J]. Chinese Physics C, 2013, 37(2): 027002. doi: 10.1088/1674-1137/37/2/027002

RIS(for EndNote,Reference Manager,ProCite)

BibTex

Txt

Milestone

Received: 2011-09-14
Revised: 2012-05-19

Article Metric

Article Views(2020)
PDF Downloads(317)
Cited by(0)

Policy on re-use

To reuse of subscription content published by CPC, the users need to request permission from CPC, unless the content was published under an Open Access license which automatically permits that type of reuse.

通讯作者: 陈斌, bchen63@163.com

1.
沈阳化工大学材料科学与工程学院沈阳 110142

Design study of the SSC-LINAC re-buncher

Corresponding author: SUN Lie-Peng,

Received Date: 2011-09-14

Accepted Date: 2012-05-19

Available Online: 2013-02-05

Abstract: A re-buncher with spiral arms for a heavy ion linear accelerator named as SSC-LINAC at HIRFL (the heavy ion research facility of Lanzhou) has been constructed. The re-buncher, which is used for beam longitudinal modulation and matching between the RFQ and DTL, is designed to be operated in continuous wave (CW) mode at the Medium-Energy Beam-Transport (MEBT) line to maintain the beam intensity and quality. Because of the longitudinal space limitation, the re-buncher has to be very compact and will be built with four gaps. We determined the key parameters of the re-buncher cavity from the simulations using Microwave Studio software, such as the resonant frequency, the quality factor Q and the shunt impedance. The detailed design of a 53.667 MHz spiral cavity and measurement results of its prototype will be presented.

HTML

Reference (1)

Design study of the SSC-LINAC re-buncher

Abstract：

References

Access

Article Metrics

Metrics

通讯作者: 陈斌, bchen63@163.com

Email This Article