Error and jitter e ect studies on the SLED for the BEPCⅡ-linac

PEI Shi-Lun; LI Xiao-Ping; XIAO Ou-Zheng

doi:10.1088/1674-1137/36/5/014

Chinese Physics C> 2012, Vol. 36> Issue(5) : 456-463 DOI: 10.1088/1674-1137/36/5/014

Error and jitter e ect studies on the SLED for the BEPCⅡ-linac

Abstract
HTML
Reference
Related

PDF

Abstract：
An RF pulse compressor is a device used to convert a long RF pulse to a short one with a much higher peak RF magnitude. SLED can be regarded as the earliest RF pulse compressor to be used in large-scale linear accelerators. It has been widely studied around the world and applied in the BEPC and BEPCⅡ linac for many years. During routine operation, error and jitter effects will deteriorate the performance of SLED, either on the output electromagnetic wave amplitude or phase. The error effects mainly include the frequency drift induced by cooling water temperature variation and the frequency/Q₀/β unbalances between the two energy storage cavities caused by mechanical fabrication or microwave tuning. The jitter effects refer to the PSK switching phase and time jitters. In this paper, we re-derive the generalized formulae for the conventional SLED used in the BEPCⅡ linac, and the error and jitter effects on SLED performance are also investigated.

References

[1]

Nantista C D. Radio-Frequency Pulse Compression for Lin- ear Accelerators (Ph.D. Thesis). Los Angeles: University of California, 19952 GU Peng-Da. Studies on New RF Pulse Compressor (Ph.D. Thesis). Beijing: Institute of High Energy Physics, CAS,1999 (in Chinese)3 PEI Guo-Xi et al. Overview of BEPCⅡ Linac Upgrade. Preliminary Design Report of BEPCⅡ-Linac, IHEP- BEPCⅡ-SB-03, 2002.64 Wangler T P. Principles of RF Linear Accelerators. New York: John Wiley Sons, Inc., 19985 LI Guang-Lin et al. The BEPC RD Report, Part I, In- jector, 19896 ZHAO Feng-Li. Private Communication

[1]	LI Lin , FANG Wen-Cheng , WANG Chao-Peng , GU Qiang . Modeling and analysis of SLED. Chinese Physics C, 2015, 39(4): 047002. doi: 10.1088/1674-1137/39/4/047002
[2]	XIAO Ou-Zheng . Design and simulation of a C-band SLED with mode converter. Chinese Physics C, 2014, 38(11): 117009. doi: 10.1088/1674-1137/38/11/117009
[3]	KE Zun-Jian , LI Jia-Cai , ZHANG Shao-Ping , AN Guang-Peng , TANG Xing-Hua , YANG Tao . A plastic scintillating fiber position detector in vacuum for the test beam facility at BEPCⅡ-LINAC. Chinese Physics C, 2012, 36(1): 67-70. doi: 10.1088/1674-1137/36/1/011
[4]	LI Zheng-Hong , XIE Hong-Quan . RF phase jitter in a klystron amplifier. Chinese Physics C, 2011, 35(9): 851-854. doi: 10.1088/1674-1137/35/9/012
[5]	QIN Qing , HUANG Nan , LIU Wei-Bin , LIU Yu-Dong , PENG Yue-Mei , QIU Jing , WANG Dou , WANG Xin-Hao , WANG Na , WANG Jiu-Qing , WEI Yuan-Yuan , WEN Xue-Mei , XING Jun , XU Gang , YU Cheng-Hui , ZHANG Chuang , ZHANG Yuan , ZHAO Zheng , ZHOU De-Min . Beam dynamics studies on BEPC-Ⅱ storage rings at the commissioning stage. Chinese Physics C, 2009, 33(S2): 65-70. doi: 10.1088/1674-1137/33/S2/017
[6]	LIU Yu-Dong , YUE Jun-Hui , WANG Na . Studies on electron cloud instability in BEPCⅡ. Chinese Physics C, 2009, 33(S2): 71-74. doi: 10.1088/1674-1137/33/S2/018
[7]	WANG Shu-Hong , PEI Guo-Xi , CHI Yun-Long , CHEN Yan-Wei , CAO Jian-She , KONG Xiang-Cheng , ZHAO Feng-Li , HOM Mi , CHEN Zhi-Bi , LIU Wei-Bin , DENG Bing-Lin , GENG Zhe-Qiao , PEI Shi-Lun , SHEN Li , LE Qi , YE Qiang . BEPCⅡ Linac Beam Commissioning and Operation. Chinese Physics C, 2008, 32(S1): 215-217.
[8]	LIU Wei-Bin , WANG Shu-Hong , YE Qiang , WANG Lin . Emittance Measurement at BEPCⅡ Linac. Chinese Physics C, 2008, 32(S1): 86-88.
[9]	SUI Yan-Feng , MA Hui-Zhou , CAO Jian-She , MA Li . Design and simulation of the wire scanner for the injector linac of BEPCⅡ. Chinese Physics C, 2008, 32(5): 397-399. doi: 10.1088/1674-1137/32/5/015
[10]	HOU Mi , GENG Zhe-Qiao . Construction of the Phasing System for BEPCⅡ Linac. Chinese Physics C, 2007, 31(4): 391-394.
[11]	WANG Shu-Hong , PEI Guo-Xi , LIU Wei-Bin , CHEN Yan-Wei , YE Qiang , GENG Zhe-Qiao . Studies on the Beam Orbit and Energy Instabilities at the BEPCⅡ Linac. Chinese Physics C, 2007, 31(11): 1067-1070.
[12]	WANG Shu-Hong , PEI Guo-Xi , SUN Yao-Lin , CHI Yun-Long , CHEN Yan-Wei , CAO Jian-She , KONG Xiang-Cheng , ZHAO Feng-Li , HOU Mi , DENG Bing-Lin . BEPCⅡ Linac Upgrade and Beam Commissioning. Chinese Physics C, 2006, 30(S1): 150-152.
[13]	ZHAO Feng-Li , HOU Mi , ZHAO Yan-Ping , LIU Jin-Tong , ZHANG Jing-Ru , ZHOU Yao-Xiang , HAN Da-Wei . Microwave System for BEPCⅡ-Linac. Chinese Physics C, 2006, 30(2): 155-158.
[14]	LI Jia-Cai , ZHANG Liang-Sheng , HU Chun-Liang , WU Yuan-Ming , CUI Xiang-Zong , LIU Zheng-Quan , ZHANG Shao-Ping , ZHOU Bao-Qing , ZHENG Lin-Sheng . Design and Performance Measurement of the 1GeV/c Multiparticle Magnetic Spectrometer in the BEPC-LINAC Test Beam. Chinese Physics C, 2005, 29(1): 55-61.
[15]	LIU Yu-Dong , GUO Zhi-Yuan , QIN Qing , WANG Jiu-Qing . Electron Cloud Instability Simulation Studies for BEPCⅡ. Chinese Physics C, 2004, 28(11): 1222-1226.
[16]	PAN Wei-Min , SUN Yi , WANG Guang-Wei , Takaaki Furuya , ichi Kurokawa . Studies on Higher Order Modes in BEPCⅡ Superconducting Cavity. Chinese Physics C, 2004, 28(3): 317-320.
[17]	PEI Guo-Xi , SUN Yao-Lin , CHI Yun-Long , WANG Shu-Hong . Progress of the Injector Linac Upgrade for the BEPCⅡ Project. Chinese Physics C, 2004, 28(11): 1214-1218.
[18]	WANG Shu-Hong , GU Peng-Da , WANG Jiu-Qing , LIU Yu-Cheng , PEI Guo-Xi , PEI Shi-Lun , ZHOU Zu-Sheng , LIU Wei-Bin . Studies on Optimizing Beam Optics and Orbit Correction for BEPCⅡ-Linac. Chinese Physics C, 2003, 27(2): 173-177.
[19]	GU Peng-Da , PEI Guo-Xi , WANG Shu-Hong . SLED System for Long Pulse Multi-bunch Linac. Chinese Physics C, 2001, 25(4): 348-353.
[20]	Electron Linac Laboratory . The 250 MeV Section of BEPC 1.1/1.4 GeV e^± Linac. Chinese Physics C, 1988, 12(S1): 19-26.

Access

Get Citation

PEI Shi-Lun, LI Xiao-Ping and XIAO Ou-Zheng. Error and jitter e ect studies on the SLED for the BEPCⅡ-linac[J]. Chinese Physics C, 2012, 36(5): 456-463. doi: 10.1088/1674-1137/36/5/014

PEI Shi-Lun, LI Xiao-Ping and XIAO Ou-Zheng. Error and jitter e ect studies on the SLED for the BEPCⅡ-linac[J]. Chinese Physics C, 2012, 36(5): 456-463. doi: 10.1088/1674-1137/36/5/014 shu

RIS(for EndNote,Reference Manager,ProCite)

BibTex

Txt

Milestone

Received: 2011-08-11
Revised: 2011-08-30

Article Metric

Article Views(1443)
PDF Downloads(367)
Cited by(0)

Policy on re-use

To reuse of subscription content published by CPC, the users need to request permission from CPC, unless the content was published under an Open Access license which automatically permits that type of reuse.

通讯作者: 陈斌, bchen63@163.com

1.
沈阳化工大学材料科学与工程学院沈阳 110142

Error and jitter e ect studies on the SLED for the BEPCⅡ-linac

Received Date: 2011-08-11

Accepted Date: 2011-08-30

Available Online: 2012-05-05

Abstract: An RF pulse compressor is a device used to convert a long RF pulse to a short one with a much higher peak RF magnitude. SLED can be regarded as the earliest RF pulse compressor to be used in large-scale linear accelerators. It has been widely studied around the world and applied in the BEPC and BEPCⅡ linac for many years. During routine operation, error and jitter effects will deteriorate the performance of SLED, either on the output electromagnetic wave amplitude or phase. The error effects mainly include the frequency drift induced by cooling water temperature variation and the frequency/Q₀/β unbalances between the two energy storage cavities caused by mechanical fabrication or microwave tuning. The jitter effects refer to the PSK switching phase and time jitters. In this paper, we re-derive the generalized formulae for the conventional SLED used in the BEPCⅡ linac, and the error and jitter effects on SLED performance are also investigated.

HTML

Reference (1)

Error and jitter e ect studies on the SLED for the BEPCⅡ-linac

Abstract：

References

Access

Article Metrics

Metrics

通讯作者: 陈斌, bchen63@163.com

Email This Article

Error and jitter e ect studies on the SLED for the BEPCⅡ-linac

HTML

目录