Design of the low energy beam transport line for the China spallation neutron source

LI Jin-Hai; OUYANG Hua-Fu; FU Shi-Nian; ZHANG Hua-Shun; HE Wei

doi:10.1088/1674-1137/32/3/014

Chinese Physics C> 2008, Vol. 32> Issue(3) : 227-231 DOI: 10.1088/1674-1137/32/3/014

Design of the low energy beam transport line for the China spallation neutron source

Abstract
HTML
Reference
Related

PDF

Abstract：
The design of the China Spallation Neutron Source (CSNS) low-energy beam transport (LEBT) line, which locates between the ion source and the radio-frequency quadrupole (RFQ), has been completed with the TRACE3D code. The design aims at perfect matching, primary chopping, a small emittance growth and sufficient space for beam diagnostics. The line consists of three solenoids, three vacuum chambers, two steering magnets and a pre-chopper. The total length of LEBT is about 1.74m. This LEBT is designed to transfer 20mA of H-pulsed beam from the ion source to the RFQ. An induction cavity is adopted as the pre-chopper. The electrostatic octupole steerer is discussed as a candidate. A four-quadrant aperture for beam scraping and beam position monitoring is designed.

References

[1]

. Thomason J W G, Sidlow R. EPAC 2000. 1625-16272. Faircloth D C, Sidlow R , Whitehead M O et al. PAC 2005.1910-19123. Thomason J W G, Faircloth D C, Sidlow R et al. EPAC 2004. 14584. Ferdinand Robin, Sherman Joseph, Stevens Ralph R et al.PAC 1997. 2723-27255. LI J H, TANG J Y. Nuclear Instruments and Methods in Physics Research Section A, 2007, 574(2): 221-2256. LI J H, TANG J Y, OUYANG H F et al. Nuclear Instruments and Methods in Physics Research Section A (has been submitted)7. Ohmori C, Kanazawa M, Takagi A et al. Nuclear Instruments and Methods in Physics Research A, 2004, 526:215-2218. Chou W, Mori Y, Muto M et al. PAC 1999. 565-5679. Mori Y, Muto M, Ohmori C et al. EPAC 2000. 2468-247010. Mori Y, Muto M, Ohmori C et al. TPAC 2001. 4056-405811. Bailey C P. EPAC 1998. 1162-116412. Jolly S, Pozimski J, Faircloth D et al. EPAC 2006. 1714-1716

[1]	Qiang Zhao , Zhi-Yong He , Lei Yang , Xue-Ying Zhang , Wen-Juan Cui , Zhi-Qiang Chen , Hu-Shan Xu . Monitoring method for neutron flux for a spallation target in an accelerator driven sub-critical system. Chinese Physics C, 2016, 40(7): 076203. doi: 10.1088/1674-1137/40/7/076203
[2]	Zheng Gao , Yuan He , Xian-Wu Wang , Wei Chang , Rui-Feng Zhang , Zheng-Long Zhu , Sheng-Hu Zhang , Qi Chen , Tom Powers . Study on transient beam loading compensation for China ADS proton linac injector Ⅱ. Chinese Physics C, 2016, 40(5): 057005. doi: 10.1088/1674-1137/40/5/057005
[3]	Gang Xu , Yi Jiao , Yue-Mei Peng . ESRF-type lattice design and optimization for the High Energy Photon Source. Chinese Physics C, 2016, 40(2): 027001. doi: 10.1088/1674-1137/40/2/027001
[4]	Ming-Yang Huang . Study of accelerator neutrino detection at a spallation source. Chinese Physics C, 2016, 40(6): 063002. doi: 10.1088/1674-1137/40/6/063002
[5]	Liang-Sheng Huang , Sheng Wang , Yu-Dong Liu , Yong Li , Ren-Hong Liu , Ou-Zheng Xiao . Impedance measurements of the extraction kicker system for the rapid cycling synchrotron of China Spallation Neutron Source. Chinese Physics C, 2016, 40(4): 047002. doi: 10.1088/1674-1137/40/4/047002
[6]	CHENG Peng , PEI Shi-Lun , WANG Jiu-Qing , LI Zhi-Hui . Effect of the transverse parasitic mode on beam performance for the ADS driver linac in China. Chinese Physics C, 2015, 39(5): 057002. doi: 10.1088/1674-1137/39/5/057002
[7]	JIAO Yi , CUI Xiao-Hao . Generating a uniform transverse distributed electronbeam along a beam line. Chinese Physics C, 2015, 39(11): 117001. doi: 10.1088/1674-1137/39/11/117001
[8]	WANG Jia-Jia , YE Mao , SHI Tan , CHANG Rui , QIAO Shan . Design of a high flux VUV beamline for low energy photons. Chinese Physics C, 2015, 39(4): 048001. doi: 10.1088/1674-1137/39/4/048001
[9]	YANG Xiao-Peng , YU Bo-Xiang , LI Yi-Guo , PENG Dan , LU Jin , ZHANG Gao-Long , ZHAO Hang , ZHANG Ai-Wu , LI Chun-Yang , LIU Wan-Jin , HU Tao , . Neutron collimator design of neutron radiography basedon the BNCT facility. Chinese Physics C, 2014, 38(2): 028201. doi: 10.1088/1674-1137/38/2/028201
[10]	LI Zhi-Hui , TANG Jing-Yu . A CW superconducting linac as the proton driver for a medium baseline neutrino beam in China. Chinese Physics C, 2014, 38(12): 127001. doi: 10.1088/1674-1137/38/12/127001
[11]	HUANG Jiang , XIONG Yong-Qian , CHEN De-Zhi , LIU Kai-Feng , YANG Jun , LI Dong , YU Tiao-Qin , FAN Ming-Wu , YANG Bo . A permanent magnet electron beam spread system used fora low energy electron irradiation accelerator. Chinese Physics C, 2014, 38(10): 107008. doi: 10.1088/1674-1137/38/10/107008
[12]	ZHU Jun , ZHANG Huang , PENG Shi-Xiang , REN Hai-Tao , XIA Lian-Sheng , WANG Wen-Dou , YANG Zhi-Yong , SHEN Yi , SHI Jin-Shui , ZHANG Lin-Wen , DENG Jian-Jun . Beam transport design for a 1 MeV prototype dielectric wall accelerator. Chinese Physics C, 2014, 38(4): 047001. doi: 10.1088/1674-1137/38/4/047001
[13]	PEI Shi-Lun , CHI Yun-Long , WANG Shu-Hong , PEI Guo-Xi , ZHOU Zu-Sheng , HOU Mi , Mykola Ayzatskiy , Ivan Karnaukhov , Volodymyr Kushnir , Viktor Mytrochenko , Andrey Zelinsky . Beam dynamics studies on the 100 MeV/100 kWelectron linear accelerator for NSCKIPT neutron source. Chinese Physics C, 2012, 36(7): 653-660. doi: 10.1088/1674-1137/36/7/015
[14]	XIAO Chen , HE Yuan , YUAN You-Jin , LU Yuan-Rong , LIU Yong , WANG Zhi-Jun , DU Xiao-Nan , YAO Qing-Gao , LIU Ge , XU Meng-Xin , HE Shou-Bo , XIA Jia-Wen . A particle-in-cell mode beam dynamics simulation of medium energy beam transport for the SSC-Linac. Chinese Physics C, 2012, 36(1): 84-90. doi: 10.1088/1674-1137/36/1/015
[15]	LI Han , SHA Peng , DAI Jian-Ping , HUANG Hong , WANG Qun-Yao . Design study on very low Beta spoke cavityfor China-ADS. Chinese Physics C, 2012, 36(8): 761-764. doi: 10.1088/1674-1137/36/8/014
[16]	YANG Zhen-Wei , DING Ming-Ming , CHEN Shao-Min , WANG Zhe , ZHANG Feng , GAO Yuan-Ning . Simulation study of neutrino nucleus crosssection measurement in a segmented detectorat a spallation neutron source. Chinese Physics C, 2012, 36(6): 538-543 . doi: 10.1088/1674-1137/36/6/010
[17]	ZHANG Bin , CHEN Yi-Xue , WANG Wei-Jin , YANG Shou-Hai , WU Jun , YIN Wen , LIANG Tian-Jiao , JIA Xue-Jun . Preliminary shielding analysis in support of the CSNS target station shutter neutron beam stop design. Chinese Physics C, 2011, 35(8): 791-795. doi: 10.1088/1674-1137/35/8/017
[18]	ZHU Ying-Shun , YANG Mei , ZHANG Zhuo , CHEN Wan , YIN Bao-Gui , SHI Cai-Tu , KANG Wen . Design and end chamfer simulation of PEFP beam line curved dipole magnets. Chinese Physics C, 2011, 35(7): 684-688. doi: 10.1088/1674-1137/35/7/015
[19]	WEI Jie , FU Shi-Nian , TANG Jing-Yu , TAO Ju-Zhou , WANG Ding-Sheng , WANG Fang-Wei , WANG Sheng . China Spallation Neutron Source - an overview of application prospects. Chinese Physics C, 2009, 33(11): 1033-1042. doi: 10.1088/1674-1137/33/11/021
[20]	OUYANG Hua-Fu , ZHANG Hua-Shun . Design of magnet and control of the beam emittance for Penning H^－ ion source. Chinese Physics C, 2008, 32(8): 668-672. doi: 10.1088/1674-1137/32/8/017

Access

Get Citation

LI Jin-Hai, OUYANG Hua-Fu, FU Shi-Nian, ZHANG Hua-Shun and HE Wei. Design of the low energy beam transport line for the China spallation neutron source[J]. Chinese Physics C, 2008, 32(3): 227-231. doi: 10.1088/1674-1137/32/3/014

RIS(for EndNote,Reference Manager,ProCite)

BibTex

Txt

Milestone

Received: 2007-05-22
Revised: 2007-06-13

Article Metric

Article Views(3348)
PDF Downloads(853)
Cited by(0)

Policy on re-use

To reuse of subscription content published by CPC, the users need to request permission from CPC, unless the content was published under an Open Access license which automatically permits that type of reuse.

通讯作者: 陈斌, bchen63@163.com

1.
沈阳化工大学材料科学与工程学院沈阳 110142

Design of the low energy beam transport line for the China spallation neutron source

Corresponding author: LI Jin-Hai,

Received Date: 2007-05-22

Accepted Date: 2007-06-13

Available Online: 2008-03-05

Abstract:

The design of the China Spallation Neutron Source (CSNS) low-energy beam transport (LEBT) line, which locates between the ion source and the radio-frequency quadrupole (RFQ), has been completed with the TRACE3D code. The design aims at perfect matching, primary chopping, a small emittance growth and sufficient space for beam diagnostics. The line consists of three solenoids, three vacuum chambers, two steering magnets and a pre-chopper. The total length of LEBT is about 1.74m. This LEBT is designed to transfer 20mA of H-pulsed beam from the ion source to the RFQ. An induction cavity is adopted as the pre-chopper. The electrostatic octupole steerer is discussed as a candidate. A four-quadrant aperture for beam scraping and beam position monitoring is designed.

HTML

Reference (1)

Design of the low energy beam transport line for the China spallation neutron source

Abstract：

References

Access

Article Metrics

Metrics

通讯作者: 陈斌, bchen63@163.com

Email This Article